Related Manuals for Exar Stretch VRC7000 Series
Summary of Contents for Exar Stretch VRC7000 Series
- Page 1 Installer's Guide Installing the Stretch encoder card ® with Milestone XProtect Milestone Systems Updated May 27, 2014...
- Page 2 Installing the Stretch encoder card with Milestone XProtect® Table of Contents Introduction ..........................3 Target audience and white paper purpose ................. 3 Stretch Board Installation ..................... 3 Stretch PCIe Driver Installation .................... 4 Adding the card to Milestone XProtect Software .............. 5 Troubleshooting ........................
- Page 3 Installing the Stretch encoder card with Milestone XProtect® Introduction In order to enable the Stretch S7 PCIe DVR add-in card in XProtect®, Milestone has developed a driver to enable compatibility. To download the driver, visit Download section here, select Device Packs under Type and click download button on your right hand side.
- Page 4 Installing the Stretch encoder card with Milestone XProtect® To install the Stretch VRC7000 Add-In card: 1. Carefully remove the card from its anti-static packaging. 2. If you are installing a VRC7016X or a VRC7032, connect a SATA power cable to the card. 3.
- Page 5 Installing the Stretch encoder card with Milestone XProtect® select Let me pick from a list of device drivers on my computer. Windows 1. When the wizard asks you to select the device driver to install, click the Have and Windows 7 Disk button, which opens the Install from Disk dialog.
- Page 6 Installing the Stretch encoder card with Milestone XProtect® 2. Open the Milestone XProtect Management Client (XProtect® Corporate) or the Milestone XProtect Management Application (XProtect® Enterprise, XProtect® Professional, XProtect® Express, XProtect® Essential and XProtect® Go). 3. Open the Add Hardware dialog and choose to add the device manually. 4.
- Page 7 Installing the Stretch encoder card with Milestone XProtect® SATA power cable and make sure it is plugged into the card (board models VRC7016X and VRC7032 require a SATA power cable connected to operate correctly). Also check to see whether the card is properly seated into the PCIe slot If the board’s LED are OFF and the SATA power cable is connected (when it applies) please contact your milestone support.
- Page 8 Installing the Stretch encoder card with Milestone XProtect® About Milestone Systems Founded in 1998, Milestone Systems is the global industry leader in open platform IP video management software. The XProtect platform delivers powerful surveillance that is easy to manage, reliable and proven in thousands of customer installations around the world.
Need help?
Do you have a question about the Stretch VRC7000 Series and is the answer not in the manual?
Questions and answers