Advertisement
The unit must be lowered to the 6 1/2' position for transport. Failure to do so may result in injury!!
To Raise rim, stand under the rim, push in an upward direction, align desired height hole to H-frame
and install Locking Spring Pin (Q) on both sides. Lower the rim in the same manner, using caution to
not drop the rim/backboard assembly as risk of damage or injury is present.
Note: Some hardware not shown for Illustration clarity.
FIGURE 1
D
F
Read Instruction #3
Do not leave outside as wind may cause tip over.
This system is not suitable for any player contact with the rim.
I J K
H
P
R
S
M N P
A
Warning!!!
Height Adjustment:
O
Rim Height Adjustment Holes
Q
C
M N P
G
L
B
2
15 1/2" Backboard Mount Holes
E
FIGURE 2
6 1/2'
7'
7 1/2'
8'
Advertisement
