Advertisement
Quick Links
INSTRUCTIONS AND ADVICE FOR THE
USE, INSTALLATION AND MAINTENANCE
OF MIXED AND GAS FUELLED
Dear Customer,
Thank you for having purchased one of our products.
We are certain that this new, modern, functional and practical appliance, built with the very highest
quality materials, will meet your requirements in the best possible way. This appliance is easy to use.
It is, however, important to thoroughly read the instructions in this handbook in order to obtain the
best results.
The manufacturer shall not be held responsible for any damages to persons or property
caused by incorrect installation or use of the appliance.
The Manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or
transcription errors; the designs in the figures are purely indicative. The Manufacturer also reserves the right
to make any modifications to the products as may be considered necessary or useful, also in the interests of
the user, without jeopardizing the main functional and safety features of the products themselves.
BUILT-IN HOT PLATES
GB
P20089R00
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kuppersberg DOMINO
Summary of Contents for Kuppersberg DOMINO
- Page 1 INSTRUCTIONS AND ADVICE FOR THE USE, INSTALLATION AND MAINTENANCE OF MIXED AND GAS FUELLED BUILT-IN HOT PLATES Dear Customer, Thank you for having purchased one of our products. We are certain that this new, modern, functional and practical appliance, built with the very highest quality materials, will meet your requirements in the best possible way.
- Page 2 DESCRIPTION OF THE HOT PLATES FV3XG/FV3EG/FV3XW/FV3EG FV3XE/FV3EE 1 Ultra rapid burner of 3350 W 2 Rapid gas burner of 3000 W 3 Auxiliary gas burner of 1000 W 4 Electric plate Ø 145 mm 5 Electric plate Ø 180 mm 6 Enamelled steel pan support 1F 7 Enamelled steel pan support 2F 8 Burner n°...
- Page 3 FV3VR/FV3VR 6 1 7 1 Hi-light electric heating element Ø 140 mm 1200 W 2 Hi-light electric heating element Ø 180 mm 1700 W 3 Hi-light electric heating element double cooking zone (conc.) Ø 180/120 mm 1700 W ("Hilight" as well) 4 Hi-light electric heating element double cooking zone (oval) Ø...
- Page 4 FV3XB/FV3EB 1 Grill 2400 W 2 Grill rack 3 Grill control knob 4 Grill on/off indicator lamp...
- Page 5 FV3XF/FV3EF Caution: All appliances are designed for personel household use only.
- Page 8 FIG.2 FIG.3 FIG.4...
- Page 11 1) ELECTRIC HOB (for ceran glass products) The hot plates are equipped with 2 hi-light heating elements with different powers and diametres. On the frontal panel, close to each knob, has been silk-screened a scheme where is indicated to which cooking zone the knob refers (fig. 5). In some particular models the scheme annexes a light indicator that turns on when the cooking zome temperature is above 60°C.
- Page 12 FIG. 6...
- Page 13 - Use adequate pans for each burner (consult the 1) BURNERS(for gas products) following table and fig.8). A diagram is screen-printed above each knob on the - When the pan comes to the boil, set the knob to the front panel. This diagram indicates to which burner reduced rate position (small flame fig.7).
- Page 14 Notes: Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 9) and by activating the mechanical aeration device (suction hood or electric fan fig. 10 and fig. 11). Intensive and lengthy use of the appliance may require additional ventilation.
- Page 15 which electric plates the knob in question 2) HOW TO USE THE ELECTRIC corresponds (see fig.12). A red warning light will PLATES come on to indicate that the plate is operating. Mixed hot plates may be equipped with a normal or A purely indicative regulation table for the normal rapid electric plates.
- Page 16 CLEANING WARNINGS: 3) HOT PLATE When the plate is switched on for the first time, Periodically wash the hot plate, the enamelled stell or if it has remained unused for a long period, it pan support, the enamelled burner caps “C” and the should be dried for 30 minutes on switch position burner heads “M”...
- Page 17 FIG.15 FIG.16...
-
Page 20: Technical Information For The Installer
INSTALLATION TECHNICAL INFORMATION FOR for the hole into which the appliance will be recessed. THE INSTALLER The appliance belongs to class 3 and is therefore Installation, adjustments of controls and subject to all the provisions established by the maintenance must only be carried out by a provisions governing such appliances. - Page 21 FIXING THE HOT PLATE - For the models FV3XW/FV3EW/FV3XG/FV3EG/FV3XE/FV3GE Fix the hob with the proper bracets "S" and fit the prominent part into the porhole "H" on the bottom; turn the screw "F" until the bracket "S" stick on the top (fig.19) FIG.
-
Page 22: Gas Connection
INSTALLATION IMPORTANT INSTALLATION 8) GAS CONNECTION Before connecting the appliance, check that the SPECIFICATIONS values on the data label affixed to the underside The installer should note that the appliance that of the hot plate correspond to those of the gas side walls should be no higher than the hot and electricity mains in the home. - Page 23 INSTALLATION WARNINGS: throttled or tughtly bent. Remember that the gas inlet union on the - It must not come into contact with sharp appliance is a 1/2" gas parallel male type in edges or corners. compliance with ISO 228-1 standards. - It must be easy to inspect the entire pipe Installation of stainless steel pipe and rubber length in order to check its state of wear.
-
Page 24: Electrical Connection
INSTALLATION 9) ELECTRICAL CONNECTION When the appliance is connected straight to the electricity main: The electrical connections of the appliance must - Install an omnipolar circuit-breaker between the be carried out in compliance with the provisions appliance and the electricity main. This circuit- and standards in force. -
Page 25: Gas Adjustments
GAS ADJUSTMENTS Always disconnect the appliance from the It is understood that only burners operating with electricity main before making any adjustments. G20 gas should be subjected to the above All seals must be replaced by the technician at mentioned adjustments. The screw must be fully the end of any adjustments or regulations. -
Page 26: Replacing The Injectors
13) REPLACING THE INJECTORS After the injectors have been replaced, the burners must be regulated as explained in paragraphs 11. The burners can be adapted to different types of gas by The technician must reset any seals on the mounting injectors suited to the type of gas in question. regulating or pre-regulating devices. - Page 27 Always disconnect the appliance from the electricity and gas mains before proceeding with any operatior. FIG. 25...
- Page 28 POWER OF ELECTRICAL COMPONENTS (FV3VR/FM3VR) Denominations Hi-light electric heating element Ø 140 mm "Hilight" 1200 Hi-light electric heating element Ø 180 mm "Hilight" 1800 Hi-light electric heating element double cooking zone conc. 1700 Ø 180/120 mm ("Hilight" as well) Hi-light electric heating element double cooking zone oval 2400 265/170 mm "Hilight"...
- Page 29 SERVICING CABLE TYPES AND SECTIONS TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY FV3X6/FV3EG H05 RR - F (Rubber) Section 3 X 0.75 mm FV3XW/FW3EW FV3XF H05 RN - F (Neoprene) Section 3 X 1.5 mm FV3XB FV3XE H05 RR - F Rubber)
- Page 30 FOR FRYER ELECTRICAL COMPONENTS OUTPUT OF THE FRYER NAME Heating resistance 2300...
- Page 31 FOR BARBECUE ELECTRICAL COMPONENTS OUTPUT OF THE BARBECUE NAME Grill 2400...
- Page 32 Tot. Nom. L.P .G.Rate = 291 g/h Voltage = 230 - 240 V~ Voltage = 230 - 240 V~ Frequency = 50/60 Hz Frequency = 50/60 Hz 2 EL. “ DOMINO ” 2 EL. “ DOMINO ” WITH TIMER (FV3XE/FV3EE) (FV3XE/FV3EE)
- Page 33 MODEL FV3VR/FM3VR 1 HEATING ELEMENT (1 RADIANT WITH DOUBLE ZONE OVAL) Voltage 230 - 240 V ˜ Frequency 50/60 Hz Tot. Rating 2200 W...
- Page 34 MODEL FV3VR/FM3VR 1 HEATING ELEMENT (1 RADIANT WITH DOUBLE ZONE OVAL "HILIGHT") Voltage 230 - 240 V ˜ Frequency 50/60 Hz Tot. Rating 2400 W MODEL FV3VR/FM3VR 2 HEATING ELEMENT (2 RADIANTS "HILIGHT") Voltage 230 - 240 V ˜ Frequency 50/60 Hz Tot.
- Page 36 BARBECUE...
-
Page 37: Technical Assistance And Spare Parts
TECHNICAL ASSISTANCE AND SPARE PARTS Before leaving the factory, this appliance will have been tested and regulated by expert and specialized personnel in order to guarantee the best performances. Any repairs or adjustments which may be subsequently required may only be carried out by qualified personnel with the utmost care and attention.
Need help?
Do you have a question about the DOMINO and is the answer not in the manual?
Questions and answers