Residual Heat Indicator - Zanussi ZKL 850 LX Operating Instructions Manual

Ceramic built-in hob

Hide thumbs Also See for ZKL 850 LX:

Table of Contents

When the cooking zones are switched on, they

may hum briefly. This is a characteristic of all

ceramic glass cooking zones and does not im-

pair either the function or the life of the applian-

ce.

The control knob is used to set the required heat output

continuously from 1–10.

It can be turned to the right or left.

When you turn the regulator back to the zero position,

the cooking zone will be switched off.

On the double circuit cooking zones only the inner hea-

ting circuit is switched on first.

If you want to heat the whole zone, you will have to turn

the rotary switch slightly past position «10» to the point

where it automatically springs back to position «10».

An indicator is assigned to each cooking zone. This il-

luminates as soon as the corresponding cooking zone

becomes hot and warns against inadvertent touching.

Important! As long as the residual heat indica-

tor is illuminated, there is a risk of burns.

Even after the cooking zone is switched off, the corres-

ponding residual heat indicator will remain on until the

cooking zone is cold.

You can use the residual heat for melting and

keeping food warm.

Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó Ó

Table of Contents