Projection Methods - Everycom X9 User Manual

PROJECTION METHODS

4 Projection methods: Depending on how you place the projector, you may need to change the projection mode
so your images will be projected correctly.
1.1 Factory defaults: The Projector is mounted on the same side of the same side of the screen as the viewer
Front Projection
1.2 Rear: The installation position of the projector and the audience are located on the two side of the screen.
You can change the projection mode to rear with the remote control by clicking MENU > SETTING > PROJECTION
MODE (Rear on Desk) as the following pictures show.
06 Support @ 1800-121-4480
1
Front On Desk
Rear On Desk
Front On Ceiling
Rear On Ceiling
MENU
3 4