Configuration; Micro I Pc Software - Micro Direct Micro I Operating Manual

Configuration

When the unit is first turned on, it may be configured for your
region. This will set the language, height and weight units, date
format and predicted values set appropriate for your region. It will
also configure the indices to be displayed and whether a percent
predicted, or Z-score is to be used to show variation from the
norm. However, all these setting may be customized using the PC
software supplied.
Turn the unit on by pressing the on/off button located at the top of
the device and the following will be displayed:
Use the up and down arrow keys to highlight the required country

and then press 'Enter' (
). This procedure is only required
when the unit is first switched on and the selection will be stored
for future use.
It is recommended that the PC software be used to adjust these
settings, if required. Connect Micro I to the PC using the USB
cable supplied. Run the software and turn on the Micro I. The PC
software will detect when the Micro I is connected. Follow the
onscreen instructions to configure your unit.

Micro I PC Software

This software allows you to customize the settings on your Micro I
spirometer and allows full spirometry reports containing patient
demographics, indices and flow volume and volume time graphs
to be generated and saved as a PDF file or printed. Once
6