Intended Use; Environment; Getting Started - Micro Direct Micro I Operating Manual

Intended Use

The Micro I Spirometer is intended to measure the maximal
volume and flow of air that can be moved out of a patient's lungs.
The system is intended for use with pediatric and adult patients
over the age of 3 years in hospitals, physician offices, laboratories
and occupational testing environments.

Environment

Please observe the following precautions:
✓ Avoid exposing the Micro I to direct sunlight.
✓ Avoid operating the spirometer in dusty conditions or near
heating appliances or radiators.
✓ Do not keep the spirometer in a damp place or expose it to
extreme temperatures.
✓ Do not direct the transducer holder towards a strong light
source while operating the spirometer.

Getting Started

It is recommended that the Micro I spirometer be fully charged
before use. The power supply is provided with separate UK, USA
and European plugs. Connect the required plug to the power
supply and plug into an electrical outlet. Connect the Micro I to the
power supply using the USB/charging cable and the charging
symbol will appear on the screen.
Fully charge for a minimum of five (5) hours when used for
the first time.
NOTE: When disconnecting the USB cable from the Micro I,
make sure to squeeze both sides of the jack to unlock the
cable from the unit.
Remove the protective film from the display screen before use.
5