Table of Contents
Advertisement
Switch Rocker
en
Switch Push
3.5. Provisioning
The Häfele Connect Mesh 6 way distributor can be provisioned when the red Status-LED on the topside flashes. Start the
Connect Mesh app and tap on "Add devices". The box will be displayed in the list of devices found. Tap the icon to start
the provisioning mode. Follow the instructions in the app. After provisioning, you can assign the individual functions to the
box in the app. Read the detailed instructions for the Connect Mesh App.
3.6. Update Mode
Option 1: Update Mode Through App
• In case the firmware is outdated, the user will be notified inside the Connect Mesh App. There the user can start and
perform the update of the mesh device.
Option 2: Manual Update by Power On/Off
• Start the device by connecting to the LOOX Driver while pressing the reset button.
• Switch ON/OFF the Connect Mesh 6 way distributor 4 times at consistent interval of 2 seconds each. (Attention: Wait
until the red status led is off before switching ON again).
• The status LED will light constantly signify Update Mode.
Now use the Häfele Connect Mesh App to update the device.
Option 3: Manual Update by Reset Button - press for 6 seconds
• Press the status button for 6 seconds and release it.
• This will keep the Connect Mesh 6 way distributor in update mode for 60 seconds and can be updated using the
Häfele Connect Mesh App.
8/10
Product number: 833.89.106
You can toggle devices on and off by
changing the rockers state.
Product number: 833.89.108
You can toggle devices on and off by
pressing the button.
Subject to
alteration
© 2020 by Häfele GmbH & Co KG
Adolf-Häfele-Str. 1 · D-72202 Nagold www.hafele.com
Advertisement
Table of Contents
