Table of Contents
Advertisement
3. Connect Mesh 6-way Distributor
en
3.1. General information
Ports
Power Supply OUT
Power Supply IN
Reset Button
Status LED
Mounting holes
Sensor Port
[image 3.1.1]
The Connect Mesh 6 way distributor acts as a node in your BLE Mesh network and manages connected devices
such as LED products and electrical furniture fittings.
3.2. Power Supply
Connect the device to the power supply by plugging it into a Häfele Loox LED Driver. Please note the specified
maximum allowed power values of the Driver and the Connect Mesh 6 way distributor. This information influences the
maximum performance of the connected devices.
3.3. Ports
The Connect Mesh 6 way distributors have 6 controllable outputs and one output that outputs the supply voltage on
the input side unchanged.
3.4. Sensor Port
Each Connect Mesh 6 way distributor has a standard Loox sensor input. Hereby, various sensors can be connected
with this. This can be e.g. dimmer and switch. See the "Questions and Answers" section.
4/10
© 2020 by Häfele GmbH & Co KG
Subject to
Adolf-Häfele-Str. 1 · D-72202 Nagold www.hafele.com
alteration
Advertisement
Table of Contents
