Table of Contents
Advertisement
To Set The Timer To Switch Off Only
B)
i)
Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00am as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button (
down, turn the increase control ( + ) until the
required length of cooking time is displayed,
e.g. 2 hrs 15 mins as Fig. 10. Turn the
decrease control (-) if necessary.
iv) Release the buttons. The AUTO display will
glow and the time of day will be displayed
after 5 seconds.
v) Set the oven temperature.
vi) To check the stop time during the cooking
period, simply press the stop time button
(
) and the stop time will be displayed, as
Fig. 11.
4. To Return The Cooker To Manual After An
Automatic Programme
To return the cooker to manual operation after an
automatic programme,
below.
At the end of a timed cooking period, the AUTO
light will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of
the buttons as Fig. 12.
Turn oven control to the OFF position. The AUTO
display will continue to flash.
Press (
) button. The AUTO display will go out
as Fig.13.
) while holding it
follow the steps given
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
17
Advertisement
Table of Contents
