Pioneer SD-533HD5 Service Manual page 120

SD-533HD5, SD-643HD5
Assembly Adjustment Location Guide
If POWER SUPPLY ASSY
If DEFLECTION SERVICE ASSY
If R, G or B CRT DRIVE ASSY
If DIGITAL CONV. ASSY
If VIDEO IP SERVICE ASSY
If SIGNAL ASSY
If CRT ASSY (R, G or B)
If LENS ASSY (R, G or B)
If MIRROR and SCREEN
If OTHER ASSY
Note :
*1: Readjustment necessary
*2: Turn on the power and confirm the screen. When adjustment deviates, it is readjusted if necessory.
• When the EEPROMs are replaced, check the status of the unit.
• If any IC of the EEPROM is damaged, readjustment of all the items is necessary.
• The necessary adjustment items differ, depending on the assembly or optical part replaced. Check and readjust the adjustment items
corresponding to the replaced assembly or part, following adjustment procedures 1 to 8.
Example: When the DIGITAL CONV. Assy is replaced, perform the following:
3. Focus check/adjustment → 4. Screen size check/adjustment → 5. Convergence check/adjustment
120
is repaired or replaced
1
3
is repaired or replaced
4
5
6
7
8
1
6
is repaired or replaced
7
8
3
4
is repaired or replaced
5
1
6
is repaired or replaced
7
8
6
is repaired or replaced
7
8
1
2
3
is repaired or replaced
5
6
7
8
3
is repaired or replaced
5
is repaired or replaced
5
is repaired or replaced
No adjustment is required
Brightness Adjustment (∗2)
Focus Adjustment (VR1: FOCUS VR) (∗2)
Screen Size Adjustment (∗2)
Convergence Adjustment (∗2)
White Balance Adjustment (∗2)
Panel Adjustment (∗1)
Panel Adjustment for 480p (∗1)
Brightness Adjustment (∗1)
White Balance Adjustment (Composite STD :∗1, Others :∗2)
Panel Adjustment (∗1)
Panel Adjustment for 480P (∗1)
Focus Adjustment (∗2)
Screen Size Adjustment (∗2)
Convergence Adjustment (∗2)
Brightness Adjustment (∗2)
White Balance Adjustment (Composite STD : ∗1, Others :∗2)
Panel Adjustment (∗1)
Panel Adjustment for 480P (∗1)
White Balance Adjustment (∗2)
Panel Adjustment (∗1)
Panel Adjustment for 480P (∗1)
Brightness Adjustment (∗1)
Deflection Yoke Adjustment (∗1)
Focus Adjustment (Lens : ∗2, VR1 Focus VR :∗1)
Convergence Adjustment (∗2)
White Balance Adjustment (Composite STD : ∗1, Others :∗2)
Panel Adjustment (∗1)
Panel Adjustment for 480P (∗1)
Focus Adjustment (Lens : ∗1, VR1 Focus VR :∗2)
Convergence Adjustment (∗2)
Convergence Adjustment (∗2)
No adjustment is required