Outline - Toho Electronics TTX-800 Operation Manual

2. Setting the MODBUS Communication

2.1 Outline

Initial settings need to be made to the product for it to perform a communication function. Setting shall be done by keys at
the front side.
Follow the procedure shown below to navigate between setting screens. See the User's Manual of the product for details.
When the setting is done, press the MODE key for more than two seconds to return to operation mode.
Communication setting mode is a setting mode that is common for channels. It can change the communication setting
with the following operation regardless of the selection of CH:
Each parameter shown above is the initial value.
- 4 -