10、First Print Instructions - Kelant S400S Product Manual

7-4
The section (7-7) can be started after the parameter setting of the section
is correct. After the section is completed, the preview bar needs to be
dragged from the top to the bottom (7-8), and the bottom of the model is
checked for completeness. If the bottom incomplete return software main
interface sets the Z axis of the mobile model in the function selection
area to the negative number to achieve the effect of the sinking model.
At the end of the day. The cbddlp format file is saved to the U disk (7-9).
7-7
10、First print instructions
Before printing, to minimize the first time fail ,
Z-axis works fine （2）The Build Plate is well leveled （3）UV light is function
properly .
7-5
7-8
7-6
7-9
（1）please ensure
22