Kelant S400S Product Manual page 16

height.
8、 Upward platform about 100mm, check whether the LCD screen works
normally: as shown in the figure, press the touch screen "Tool" →
"calibrate" → "Next", if the 2K forming screen can display the grid
completely, it means the LCD screen works normally. ,as the picture
shows.
9、 Install the resin Vat : Push the resin Vat into the bottom plate
and align it with the groove and trough on the middle plate. Finally,
tighten the two thumbscrews as shown.
Push into the trough
Vat cap
13