8、Leveling - Kelant S400S Product Manual

7、 Leveling
The machine has been leveled at the factory, and you
can print with the flatbed installed. If the printing
does not stick to the platform, please follow the steps
below to level
1、 Take out the assembled printing platform and loosen the four screws
on the left and right sides of the cradle head, so that the cradle
head can move up and down freely. As shown in the picture.
2、 Check and keep 2K LCD screen and platform clean No resin and no
impurities (foreign matter can be wiped with alcohol).
3、 Turn on the machine's power switch.
4、 Put an A4 paper on the 2K LCD screen, install the platform to the
platform bracket, and tighten the black platform fixing knob (as
shown).
5、 As shown in the figure, click "Tool" → "Nanual" → "Home" on
the touch screen → wait for the Z-axis to descend and stop
11