Tips On Safe And Smooth Operation - Isuzu FTR Manual

6-28

TIPS ON SAFE AND SMOOTH OPERATION

Cross
chain
Connector
(curled end)
Hook
Chain band
4608498̲sec06̲SAFE AND SMOOTH OP6-28 6-28 4608498̲sec06̲SAFE AND SMOOTH OP6-28 6-28
How to Fit a Tire Chain
Wire
Clip
1. Making sure the tire chain is not
twisted, place it on the tire such that
the curled ends are on the outside (the
side that will make contact with the
ground).
2. Pull both ends of the tire chain as far
as possible. Couple the inner hooks
first, and then couple the outer hooks.
3. The hook should be connected such
that it is flat against the tire side face.
Also, confirm that there is no twisting
or bending in the chain.
4. Retain any excess portion of chain
with wire so it does not hit the
vehicle's body or brake pipes.
5. Hook the clips over the chain band
(with the clips pointing outward) such
that the clips are evenly positioned
around the band.
6. After fitting the tire chains and
driving for a while, check whether the
chains are loose or they have come
unfastened.
2015/11/02 14:12:43 2015/11/02 14:12:43