Features And Benefits - Oasis P Series Installation And Operation Manual

INSTALLATION & OPERATING INSTRUCTIONS
OASIS'S POOL AND SPA PUMP
Congratulations on your purchase of a quality product from the OASIS range of Pool and Spa
Equipment. You will be pleased with the many years of reliable and efficient performance your
OASIS pool and spa pump will deliver.
OASIS pool and spa pumps have been designed to circulate swimming pool and spa water in
conditions set out in the Australian Standard for swimming pool water quality (AS 3633)
OASIS designs its own electric motors specifically for its pumps. The matched motor and "pump
wetend" are designed to provide quiet operation and energy efficiency.
OASIS'S totally enclosed fan-cooled motor incorporates "thermal cut-out" overload protection
designed to protect the motor from overheating.
Every OASIS pool and spa pump is thoroughly water tested against flow, pressure, voltage, current
and mechanical performance parameters. OASIS'S advanced pump technology provides reliable and
efficient performance that lasts.
OASIS pool and spa pump are designed with high flow and the head pressures are ideally suited for
the modern pool or spa with extensive equipment.
OASIS pool and spa pumps are designed to operate with most chlorinators, heaters and other pool
equipment producing correct water flow and energy efficiency.
FEATURES & BENEFITS
•
Powerful high-performance pumping delivers optimum flow rates & rapid priming
•
High flow at high pressure for rapid pool water turnover
•
Computer-designed impeller and diffuser quickly corrects loss of water flow allowing a free
flow of water offering whisper quiet, efficient performance
•
Easy to remove, see through strainer lid for easy removal of leaves
•
Extra-large strainer basket allows long intervals between cleaning.
•
Continuous duty rated motor with an enclosed fan cooled motor protects against dirt, dust
and water for long life
•
Built-in thermal overload protects the motor against damage from overheating
•
Every unit is pressure and performance tested in factory ensuring quality and reliability
•
High performance Silicon Carbide mechanical seal, fitted for long life in salt & fresh water
•
2m power lead with 10amp three-pin plug fitted
•
Constructed of strong corrosion and U.V. resistant materials for long life
•
On some models, built-in check valve reduces reverse flow of water through pump.
•
Exceed electrical standards for installation in the specified pool zone
•
A.B.S. quick connect couplings makes installation simple
•
If required a drain plug enables pump casing to be drained for easy maintenance
•
Limited 3 Year Warranty – See Warranty Information
P SERIES HIGH PERFORMANCE - P270 | P330 | P380 | P490 POOL & SPA PUMP
INSTALLATION AND OPERATION MANUAL
info@oasisaquatics.com.au
oasisaquatics.com.au
4