No Pid Commands - Ericsson RX8 Series Manual

SKY
SKQ
MDS
MRQ
RST
RBT
(NEW)
FQL
(NEW)
NOTE...
4.16

No PID Commands

Command = NOP
SUB
VID
PCR
AUD
AU2
AU3
AU4
AU5
AU6
Document No. ST.TS.EXXXXX.1 2010-03-04
Set SNG descrambling key
(as CAS;DSK)
Verify SNG descrambling
key
Set descrambling mode
(as CAS;RAM)
Read descrambling mode
Reset IRD to factory
defaults and reboot
Reboot the IRD
Flush quality log
1. See Alteia and System 3000 alarm bitmaps in Chapter 4.6
2. RL2, RL3, RL4, RL5, RL6 are the same as RL1, they set the alarm relay. They
are existing because of backward compatibility.
Description
Set the video PID to the NULL PID
Set the PCR PID to the NULL PID
Set the audio 1 PID to the NULL PID
Set the audio 2 PID to the NULL PID
Set the audio 3 PID to the NULL PID
Set the audio 4 PID to the NULL PID
Set the audio 5 PID to the NULL PID
Set the audio 6 PID to the NULL PID
Supported Alteia Protocol Commands and Messages
ddddddd 7 digit RAS DSNG key value
Range: 0000000 to 9999999
- -
FIX Fixed link RAS mode (using
fixed internal RAS key)
DSN DSNG RAS mode (using
manually entered SNG RAS
DIS key)
RAS disabled
- Current mode
None -
None -
None -
NNN Parameter Description
-
-
-
-
-
-
-
-
59 (59)