Wipe Protection; Energy Consumption Display; Basic Settings - Siemens ET9 FKB1Q Series User Manual

en Wipe protection
11 Wipe protection
Wiping over the control panel while the hob is switched
on may alter settings. Your hob has a wipe protection
function to prevent this.
The main switch is excluded from the wipe protection
function. You can switch the hob off at any time.
12 Energy consumption display
This function indicates the total amount of energy con-
sumed between switching the hob on and switching it
off again.
Once switched off, the energy consumption is dis-
played in kilowatt hours, e.g. 1.08 kWh, for
10 seconds.
13 Basic settings
You can configure the appliance to meet your needs.
13.1 Overview of the basic settings
You can find an overview of the basic settings and the
default factory settings here.
Dis- Selection
play
Automatic childproof lock
– Switched off
– Switched on
– Manual and automatic childproof lock are
switched off.
Signal tone
– Confirmation signal and operating error
signal are switched off. The main switch sig-
nal remains switched on.
– Only the operating error signal is
switched on.
– Only the confirmation signal is switched
on.
– Confirmation signal and operating error
signal are switched on.
⁠ ⁠

Energy consumption display

Ask your electricity supplier what the mains
voltage is.
– Consumption display is switched off.
– Consumption display at mains voltage of
230 V.
– Consumption display at mains voltage of
400 V.
– Consumption display at mains voltage of
220 V.
– Consumption display at mains voltage of
240 V.
Automatic timer
- Switched off.
⁠ - - Cooking time after which the hotplates
switch off.
Factory setting
1
12
1
1
1
11.1 Activating wipe protection
Touch
▶
a A signal sounds.
a The indicator lamp above
a The control panel is locked for 30 seconds.
The accuracy of the display depends on various factors
such as the voltage quality of the power supply.
The display can be activated in the basic settings.
→ Page 12
Dis- Selection
play
Duration of the timer end signal
– 10 seconds.
⁠ ⁠ Activation of the heating elements
– Switched on
hotplate.
Time for selecting hotplates
always be adjusted without having to select it
again.
– You can adjust the last hotplate selected
within 10 seconds after selecting it. After this
time you have to select the hotplate again be-
fore adjusting it.
Resetting to the factory settings
– Switched on.
Factory setting
1
13.2 Changing basic settings
1
Requirement: The hob is switched off.
Switch on the hob.
1.
⁠ .
⁠
1
– 30 seconds.
– 1 minute.
– Switched off
– The last setting before switching off the
1
– Unlimited: The last hotplate selected can
1
1
– Switched off.
lights up.