Advertisement
KEYBOARD USE - WITH BIO-SAUNA
The area identified as the "button area" carries the printing of symbols necessary for activating the various product functions. The user touches the
symbols to activate the functions described below.
On the top right hand side is a box with a checkmark that is activated to indicate the status of the function.
P1
P3
P6
6
P5
SAUNA FUNCTION:
Press key P5 to activate or deactivate the sauna function.
P5 blue: DEACTIVATED
P5 orange: ACTIVE (in heating), automatically changes to
green when the temperature is reached. Press key P6 to go
to the sauna parameter settings menu and the following are
displayed in this order:
CURRENT TEMPERATURE AND MOISTURE
MEASUREMENT
COUNTDOWN MEASUREMENT
TEMPERATURE SET POINT (50°C - 100°C)
- Press key P3 (keys P1 and P2 flash).
- Raise and lower the temperature with keys P1 and P2.
- Press key P4 to confirm the temperature.
MOISTURE SET POINT (1% - 58%)
- Press key P3 (keys P1 and P2 flash).
- Raise and lower the temperature with keys P1 and P2.
- Press key P4 to confirm the temperature.
COUNTDOWN SET POINT (1h - 12h)
- Press key P3 (keys P1 and P2 flash).
- Raise and lower the countdown with keys P1 and P2.
- Press key P4 to confirm the countdown.
FUNCTION SHUT-DOWN
Icon to simultaneously deactivate all active functions.
These can be activated by pressing the P3 key when this
icon is shown on the display.
ALARM ICON
This icon appears in case of an alarm in the sauna. To
reset the alarm, the product must be switched off and
then on again.
TEMPERATURE AND MOISTURE MANAGEMENT
There is a steam generator with a capacity of 5 litres of water on the bio-sauna
version inside the heater. Once the water inside the heater is finished, a sound
will be emitted to signal the absence of water. Use a jug / ladle to fill the
generator.
TEMPERATURE AND MOISTURE SET POINT RANGE (table shown on the side)
Temperature (°C)
50
Moisture Range (%) 01-58 01-39 01-29 01-20 01-14 01-07
NOTES: Moisture set point set to 01, the steam generator will be
completely off.
All keys are blue backlit during the stand-by function. Only one icon is shown on the display at a time.
KEY P1: Scroll down or decrease function on the settings screens
KEY P2: Scroll up or increase function on the settings screens
P2
KEY P3: Activate functions or enable changes on the settings screens
P4
KEY P4: Output function from sub-menus and settings screen
KEY P5: Sauna activation, shut-down function
P7
KEY P6: Activates the settings sub-menu
KEY P7: Chromotherapy activation, shut-down function
60
70
80
90
100
CHROMOTHERAPY FUNCTION:
Press key P7 to activate or deactivate the chromotherapy
function. Press key P6 with this icon to go to the colour
selection menu, divided as follows:
TONIC CYCLE
- Press key P3 to activate this colour cycle.
ENERGY CYCLE
- Press key P3 to activate this colour cycle.
RELAX CYCLE
- Press key P3 to activate this colour cycle.
MANUAL COLOUR SELECTION
- Press key P3 (keys P1 and P2 flash).
- Change colours with keys P1 and P2.
- Press key P4 to confirm the colour.
BLUETOOTH FUNCTION:
Bluetooth activation and shut-down function.
playback, activate Bluetooth on your smartphone/phone,
search for the SAUNAVITA product signal to connect and
activate the chosen track.
to the audio parameters adjustment menu:
PLAY / PAUSE
- Press key P3 to pause or activate the
chosen track.
VOLUME ADJUSTMENT
- Press key P3 (keys P1 and P2 flash).
- Raise and lower the volume with keys P1 and P2.
- Press key P4 to confirm.
03
For audio
Press key P6 with this icon to go
Temperature (°C)
Advertisement
