Sanyo PLC-8815E Owner's Instruction Manual page 16

LAMP REPLACEMENT INDICATOR
Light is orange when projection lamp is nearing end of service life.
TEMPERATURE WARNING INDICATOR
Flashes red when internal projector temperature is too high.
READY INDICATOR
Light is green when projector lamp is ready to be turned on.
LAMP POWER INDICATOR
Light is dim when the projector is on.
Light is brightened when the projector is in stand-by mode.
LAMP POWER ON/OFF BUTTON
Used to turn projection lamp on or off.
VOLUME BUTTONS
l
Used to adjust volume.
FINE SYNC BUTTONS
Used to adjust fine sync.
: MODE BUTTON
Used to select video source.
(Computer 1 or Computer 2 Input)
Used to reset to normal picture adjustment preset by factory.
. SYSTEM BUTTON
Use this button, the POINT UP/DOWN/LEFT/RIGHT buttons and the SELECT button to select computer system.
MENU BUT-TON
This button will activate the MENU operation.
Use this button, the POINT UP/DOWN/LEFT/RIGHT buttons and the SELECT button to make adjustments to the
projector's setting in MENU operation.
ZOOM BUTTON
Used to select power zoom lens adjust.
FOCUS BUTTON
Used to select focus adjust.
buttons (UP, DOWN, LEFT or RIGHT).
SELECT BUlTON
This button has different functions depending on when used. This button is used to execute the item selected, to
increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.