Operation Modes - Duramaxx Maxxcool 12000 Manual

The conditioner is designed to create the comfort-
able climatic conditions for the people in the room.
It can cool and dehumidify (and heat in models
with heat pump) the air in a completely automatic
way.
The air sucked in by the fan enters from the grill of
the front panel and passes through the filter, which
keeps the dust. Then it is conveyed by the heat
exchanger and cooled and dehumidified or heated
through the heat exchanger.
The heat removed from the room is drained out-
side. When the cycle has finished the fan gives
back the fresh air in the room; the direction of the
air outlet is regulated by the flaps, which are mo-
torized up and down, and manually moved right
and left by the vertical deflectors.
Swing Control of the Airflow
The air outlet flow is uniformly distributed
in the room. It is possible to position the direction of
the air in the optimal solution.
The key SWING activates the FLAP, the air flow is
directed alternatively from up to down. In order to
guarantee an even diffusion of the air in the room:
• In cooling mode: orient the flaps in horizontal
direction.
• In heating mode: orient the flaps downward as
the warm air always tends to rise upward.
The deflectors are positioned manually and placed
under the flaps. They allow to direct the air flow
rightward or leftward.
Caution: This adjustment must be done with the
appliance switched off.
Danger: Never insert your hand or objects in the air outlet of
the units! These units contains a fan that turns at high speed.
42

Operation Modes