System Description - Duramaxx Maxxcool 12000 Manual

Indoor Unit
1 Front panel
2 Air filter
3 Optional filter
4 LED Display
5 Signal receiver
6 Terminal block cover
7 Ionizer generator (if installed)
8 Deflectors
9 Emergency button
10 Typenschild des Innengeräts
11 Airflow direction flaps
12 Remote control
Outdoor Unit
13 Air outlet grille
14 Outdoor unit rating label
15 Cover
16 Gas valve
17 Liquid valve
• The conditioner is made up of two
or more units connected between
themselves through copper pipes
(properly insulated) and an elec-
trical connecting cable.
• The indoor unit is installed on the
walls of the room to be condi-
tioned.
• The outdoor unit is installed on
the floor or on the wall on suit-
able brackets.
• Technical data of the air condi-
tioner are printed on the labels
placed on the indoor and outdoor
units.
• The remote control has been de-
signed for an easy and fast use.
36

System Description

Note: the above figures are only intended to be a
simple diagram of the appliance and may not
correspond to the appearance of the units that
have been purchased.