Operation - Duramaxx Maxxcool 12000 Manual

Auto-Restart-Function
The appliance is preset auto-restart func-
tion by manufacturer. With this function the
air conditioner can keep the selected set-
tings after a blackout or a voltage drop.
To deactivate the AUTO-RESTART function,
proceed as follows:
1. Switch the air conditioner off and plug
it off.
2. Press the emergency button mean-
while plug it in.
3. Keep pressing the emergency button
for more than 10 seconds until you
hear four short beeps from the unit.
The AUTO-RESTART function is off
To activate the AUTO - RESTART function,
follow the same procedure until you hear
threeshort beeps from the unit.
Emergency Function
If the remote control is lost, proceed as fol-
lows:
1. Lift the unit's front panel to reach the
emergency button of the air condi-
tioner.
2. If you press the button once ( one
beep ), the air conditioner will work in
forced cooling function.
3. If you press the button twice ( two
beeps ), the unit will work in forced
heating function.
4. To switch off the unit, you just need to
press the button again (a single long
beep). After 30 minutes in forced func-
tion, the air conditioner will automati-
cally start working in FEEL mode. The
FEEL function is described later in this
manual.
38

Operation

Note: The shape and position of the emer-
gency button may vary according to the
model, but their function is the same.
Der Notschalter kann bei
einigen Modellen auf der
rechten Seite sein.