Maintenance
Post-Dive
1. Rinse the housing with flat port installed in fresh water.
2. NEVER leave your housing in the fresh water rinse tank. Collisions
with other peoples' gear can cause scratches or damage to your
equipment.
3. Dry the flat port with a clean micro fiber lens cleaning cloth.
4. Attach the protective front vinyl cover.
5. Stow the housing in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the housing with a towel or cloth.
Travel and Storage
1. Clean and dry the exterior of the flat port. DO NOT use any type of
glass or surface cleaner on the flat port.
2. Attach the protective front vinyl cover.
3. Store in a cool, dry place.
Scratches
Often scratches will fill in with water and become invisible in the
resulting image. Scratches are most likely to show up in your image
when shooting towards the sun or a light source.
If the scratches are too deep, the flat port will need to be returned to
Ikelite for replacement of the glass.
9