Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Renfert Basic master 2948
Summary of Contents for Renfert Basic master 2948
- Page 1 Basic master No. 2948 Bedienungsanleitung Ideas for dental technology...
-
Page 2: Table Of Contents
Basic master No. 2948 ENGLISH 1. Introduction ......................... 1.1 Employed Symbols ....................2. Safety ............................ 2.1 Intended use ......................2.2 Improper use ......................2.3 Environmental conditions for safe operation..........2.4 Hazards and warnings ..................2.5 Authorised persons ....................2.6 Liability Exclusion .................... -
Page 3: Safety
Units with damaged power supply cords, tubes or other defects must not be used. Risk of Injury! If unauthorised attachments are used, there is a danger of injury. nly original Renfert ttings and acces- sories may be used. Please observe the accident prevention regulations provided by the „employer‘s liability insurance associ- ation“! Always disconnect the unit from the compressed air and power sources prior to beginning any mainte- nance work. -
Page 4: Authorised Persons
The product is altered in any way other than those alterations described in the operating instructions. The product is repaired by other than an authorized facility or if any but Renfert OEM parts are employed. The product continues to be employed, despite obvious safety faults. -
Page 5: Standard Delivery
Standard Delivery 1 Basic master 1 Foot switch 1 Connection set 1 Set of Operating Instructions, with attachment 1 Power cord Accessories Abrasives Cobra aluminium oxide 1594-1105 25 μm [500 mesh], white 5 kg canister 1594-1205 50 μm [270 mesh], white 5 kg canister 1594-2220 50 μm [270 mesh], white 20 kg bucket 1584-1005... -
Page 6: Electrical Connection
Sandblasting materials from other manufacturers may be used providing the grain size, grain shape and degree of purity comply with the above mentioned materials. The company Renfert GmbH assumes no liability for function and durability of the units if other sandblasting material is used. -
Page 7: Operation
Cold silanization in the sandblasting unit The Basic series of Renfert sandblasting units is exclusively recommended by 3M ESPE for use with ROCATEC™. This bonding system is ideal if an adhesive bond is required between a composite and a dental material (metal, acrylic, porcelain, zirconia porcelain). -
Page 8: Lamp Cover
Serial number, production date and unit version can all be found on the unit‘s type plate. Shipping Notes Empty all blasting tanks. Order Renfert transport packaging (Tel. +49 7731 8208-383) The return form can be downloaded from the „Advice“ section on the Renfert website at www.renfert.com. Trouble shooting Problem Possible cause Corrective action No air and no abrasive. -
Page 9: Warranty
[15,55 x 11,22 x 18,11 inch] Warranty Provided the unit is properly used, Renfert warrants all parts of the Basic master for a period of 3 years. In case of any claims for warranty original dealers‘ invoice is required. Parts which are subject to natural wear and tear such as consumer products are excluded from the guarantee (e.g.
Need help?
Do you have a question about the Basic master 2948 and is the answer not in the manual?
Questions and answers