Transporting Your Printer - Canon PIXMA GM2000 Series Getting Started

Loading Paper into the Rear Tray
1
Open the rear tray cover and extend the paper
support.
2
Open the feed slot cover and slide the right-
hand side paper guide to the far right.
a

Transporting Your Printer

When relocating the printer, make sure of the following. Refer to the Online Manual for details.
Check that the joint button is pressed down completely to
avoid ink leaks.
Check that the position of the ink valve lever is closed.
8
b
3
Load several sheets of paper with the print side
facing up and slide the side paper guide against
the edge of the paper stack.
a
b
4
Close the feed slot cover.
Pack the printer in a plastic bag in case ink leaks.
•
Pack the printer in a sturdy box so that it is placed with its
bottom facing down, using sufficient protective material
to ensure safe transport.
•
Do not tilt the printer. Ink may leak.
•
Please handle with care and ensure the box remains flat
and NOT turned upside down or on its side, as the printer
may be damaged and ink in the printer may leak.
•
When a shipping agent is handling transport of the
printer, have its box marked "THIS SIDE UP" to keep the
printer with its bottom facing down. Mark also with
"FRAGILE" or "HANDLE WITH CARE".