Related Manuals for mamibot ProVac Plus2
Summary of Contents for mamibot ProVac Plus2
- Page 1 The expert for robots in your home With one click to the online shop myRobotcenter.eu myRobotcenter.co.uk myRobotcenter...
- Page 2 ProVac Plus2 Robot Hoover USER MANUAL Thanks for purchasing Mamibot robot hoover. Please read this user manual carefully before using and keep it properly for future use.
-
Page 3: Bottom View
About your ProVac Plus2 Top View Dust box cover Start/Stop On/Off Bumper Drive wheel Side Brush Bottom View Suction Port Battery Box Front Anti-falling Wheel Sensor Side Brush Water Tank Mounting Pole Water Tank Cap Water Water Tank Leaking Area... - Page 4 Maintenance of ProVac Plus2 Clean or Replace the Side Brush Remove side brush screw. Take off side brush. The side brushes can sometimes be deformed during transportation or when the product is used under particular conditions. If this happens, it is possible to return to the original shape by putting bristles in hot water.
- Page 5 Maintenance of ProVac Plus2 Clean the Dust Bin and Filter Remove and empty the dust bin after each use. Clean the dust bin A: Pull out the cover and clean filter. B: Clean or replace filter. Remove or Install Battery...
-
Page 6: Frequently Asked Questions
A: It might be stopped because of low power, or stuck by obstacles, or by carpet with long rugs, or moves onto carpet when cleaning with water tank and mop attached. ProVac Plus2 is not supposed to clean carpets with long rugs, or when with water tank attached. Please be sure that there are no cables, clothes, curtain belts, or any other materials scattered in its cleaning area, to avoid tangling or trapping your robot hoover during cleaning. -
Page 7: Important Safety Insructions
Anti-Tangle System The ProVac Plus2 won’t get stuck on cords, carpet fringe or tassels. When it detects that it had picked up a cord or tassel, it will automatically stop its side brushes and try to escape. It may make a clicking noise when anti-tangle is activated. -
Page 8: Specification
Specification Model No.: ProVac Plus2 Cleaning Modes: 3 modes (edge, spiral, random) Battery: 7.4V 2.200/2.600mAh Lithium Charging time: 3-4 hours Working time: 80-100min Dimension: 25.5 x 24.3 x 8.1cm Adapter: AC100-240V 50/60Hz Dust box: 0.30 l Noise Level: <60dB Cleaning surface: multiple (wooden, marble, ceramic) -
Page 9: Troubleshooting
6. Troubleshooting Problems Causes and Solutions The robot hoover doesn’t work „ Check if the robot hoover is switched on. „ Check if the dust container, filter and motor are clean or not. „ Check if the robot hoover needs to be charged. Cleaning power is weak Turn power off and: „...
Need help?
Do you have a question about the ProVac Plus2 and is the answer not in the manual?
Questions and answers