Related Manuals for mamibot ProVac Plus2
Summary of Contents for mamibot ProVac Plus2
- Page 1 Thanks for purchasing Mamibot robot vacuum cleaner. Please read this User Manual carefully before using and keep it properly for future use.
- Page 2 Floor mopping Robot About Your ProVac Plus2 Top Vi e w Dust box cover Start/Stop On/Off Bumper Drive wheel Side Brush Bottom View Battery Box Suction Port Direction Anti-falling Sensor Wheel Side Brush Water Tank (Optional Models) Water Tank Cap...
- Page 3 Maintenance of ProVac Plus2 Floor mopping Robot 1. Clean or replace the side brush Remove side brush screw Take off side brush The side brushes can sometimes be deformed during transportation or when the product is used under particular conditions. If this happens, it is possible to return to the original shape by putting bristles in hot water.
- Page 4 Maintenance of ProVac Plus2 Floor mopping Robot Remove and empty the dust bin after each use Clean the dust bin Push out the cover and clean filter Clean or replace filter 4. Remove or Install Battery Use of ProVac Plus2 1.
-
Page 5: Frequent Asked Questions
Q: Why doesn’t ProVac Plus2 slow down as it approaches certain obstacles? A: The ProVac Plus2 uses its light Touch Bumper technology to identify walls and other obstacles, allowing it to slow down and gently touch the obstacles with its bumper before changing direction. -
Page 6: Important Safety Instructions
Important Safety Instructions Floor mopping Robot ► This appliance should only be used for domestic cleaning, as described in this user guide. ► Always switch off and remove the charger from the socket before cleaning the appliance or any maintenance task. ►... - Page 7 Specifications: Model No.: ProVac Plus2 Cleaning Modes: 3 modes (edge, spiral, random) Battery: 7.4V 2200/2600mAh Lithium Charging time: 3-4 hours Working time: 80-100min Dimension:25.5*24.3*8.1cm Adapter: AC100-240V 50/60Hz Dust box: 0.30l Noise Level: <60dB Cleaning surface: multiple (wooden, marble, ceramic) Quality Factories have been independently assessed by authorized Party for quality and production management.
- Page 8 Problems Causes and Solutions The robot cleaner doesn’t work ★ Check that the robot cleaner is switched on. ★ Check the dust container, filter and motor are clean or not. ★ Check if the robot cleaner needs to be charged. Cleaning power is weak Turn power off and: ★...
Need help?
Do you have a question about the ProVac Plus2 and is the answer not in the manual?
Questions and answers