Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ Content 1. Scope of delivery: ..........................4 2. Assembly instruction ........................5 2.1 Mounting the front wheels/swivel wheels..................5 2.2 Mounting the rear wheel axle ....................... 6 2.3 Fixing the rear wheels ........................6 2.4 Assembly of the roofing ........................
Page 3
Original FUXTEC CTL-900 Folding/Foldable Wagon Congratulations on your original FUXTEC wagon. To make you and your child feel safe when using the FUXTEC CTL-900 wagon, you have chosen a high-quality product from FUXTEC and thus created an excellent choice. High-quality manufacturing and continuous, strict quality controls assure you that you will enjoy your FUXTEC wagon for a long time.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 2. Assembly instruction 2.1 Mounting the front wheels/swivel wheels Step 1: Place the front wheel on the bracket as shown. Step 2: Press the safety button and keep it pressed. Step 3: With the safety button pressed down, place the front wheel onto the holder.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 2.2 Mounting the rear wheel axle Step 1: Position the rear axle as shown Step 2: Press the rear wheel axle onto the frame until it engages. Step 3: Please check carefully that the rear wheel axle is engaged and then firmly connected to the frame.
Page 7
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ Step 2: Join the bars of a pair along the middle retaining rubber band. Step 3: Please place the attachments of the holding rods diagonally on the telescopic rods - as shown in the picture on the left.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 2.5 Attaching the rear bag Hook the rear bag into the horizontal frame struts below the push handle as shown. 3. Intended use 3.1. Removing and attaching the protective cover Step 1: Place the wagon in front of you as shown.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 3.2 Unfolding the wagon Step 1: Loosen the safety clip. Step 2: Pull the wagon apart and lay the fabric over the frame. Fix the safety clip outside the aluminium frame to prevent accidental folding of the wagon during use.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 3.3 Folding the wagon Step 1: Remove the roofing and retract the telescopic rods into the frame. Step 2: Fix the safety clip inside the frame as shown. Step 3: Pull on the fabric tab shown to pull the wagon together.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 3.4 Adjusting the push handle and pull bar Step 1: Press both buttons on the push bar at the same time to adjust the angle. The handle can lock in different positions.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 3.6 Operating and releasing the parking brake To lock the brake, press it down. Make sure that the brake rod engages with the gear wheels of the tyres when braking. To release the lock, lift the brake lever.
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ 3.8 Use of safety belts Insert the combined shoulder belt/pelvis belt buckles into the buckle to close the 5-point safety belt. Adjusting the belt: Adjust the belt by moving the belt adjusters on the shoulder, lap and crotch straps to the required position.
Do not use the wagon if parts are bent, worn or broken. – Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL – 900.
When asserting the warranty, the original sales receipt with the date of sale must be enclosed. Warranty repairs are carried out exclusively by FUXTEC GmbH. A warranty claim exists only if the product is used as intended.
Keep the instructions carefully for future reference. Do not use accessories that have not been approved by FUXTEC GmbH for use with the CTL-900. Only original spare parts made or recommended by FUXTEC GmbH should be used with the CTL-900.
Page 17
Original User Manual FUXTEC CTL-900 – rev1 _________________________________________________________________________________ WARNING! When parking the wagon, always apply the brake before inserting or removing the child. WARNING! Loads attached to the push handle impair the stability of the wagon. WARNING: Protect children from intense sunlight. The soft top does not provide complete protection against dangerous UV radiation.
Need help?
Do you have a question about the CTL900 and is the answer not in the manual?
Questions and answers