Download Print this page

Hagerman Technology The Ripper Quick Start Manual

Phono preamp with usb output

Table of Contents

Download this manual

HAGERMAN

T E C H N O L O G Y

The Ripper

Phono Preamp with USB Output

Made in USA

Table of Contents

Need help?

Do you have a question about the The Ripper and is the answer not in the manual?

Page 1 HAGERMAN T E C H N O L O G Y The Ripper Phono Preamp with USB Output Made in USA...
Page 2 The Ripper Digital Phonostage Copyrights & Trademarks © Copyright Hagerman Technology LLC 2006. All rights reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent. USB, iTunes, Windows XP, OS-X, and other various terms are trademarks of their respective organizations.
Page 3 The Ripper Digital Phonostage Description The Ripper is a superb analog phonostage mated to a USB analog-to-digital converter. It was designed to make recording LPs to computer disk as simple and straightforward as possible, while maintaining a very high level of sound quality.
Page 4 The Ripper Digital Phonostage Operation The Ripper has no power switch (only 2 watts) and turns on immediately upon plugging in. The front panel LED should light up. Connect the ground lead from your turntable to the ground lug between the RCA jacks on the rear panel.
Page 5 The Ripper Digital Phonostage Troubleshooting Problem Solution Power LED off. Unit not plugged in? USB LED off. No bus power available from USB port? PC not configured for USB audio? No sound. Check select switch. Try headphone output. Audio stops or “tics” are Too many devices on the USB bus? present.