Introduction; Getting Started; Installation; Choosing Location - RainWise MK-III Series User Manual

1)

Introduction

The MK-III sensor assembly has been designed to offer improved durability and serviceability.
This sleek new design is 33 inches high and weighs just over 7 pounds. It is the most accurate,
durable, and easiest to install weather station available.
The long range MK-III-LR features a powerful new 2.4 GHz spread spectrum radio that
increases range to 1 mile line of sight. It also features a real time 2 second wind speed and
direction update interval.
2)

Getting Started

Congratulations! You are unpacking the ultimate in fine weather watching equipment. RainWise
has been setting industry standards in precision environmental monitoring instrumentation since
1974. The MK series weather station you have just purchased is the result of our years of
expertise.
Before permanently installing your system, set it in the same room as your receiving device, turn
the system on and confirm successful communication.
3)

Installation

3.1)

Choosing Location

The best location for your weather station is one that is free of obstruction and at an elevation
high enough to prevent interference to the anemometer (wind sensor) from nearby trees or
buildings.
Ideally, the station should be no closer to an obstruction than 10X the obstruction's height.
RainWise MK-III Users Guide
2016 Revision
4