Airmax ProAir 4 Installation Instructions

Diffuser for all pondseries and lakeseries aeration systems

Table of Contents:

Product Contents . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ProAir™ 4 Diffuser

For All PondSeries™ and LakeSeries™

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .4

Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . .4

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Aeration Systems

Item # 510166

Table of Contents

Need help?

Do you have a question about the ProAir 4 and is the answer not in the manual?

Page 1 ProAir™ 4 Diffuser For All PondSeries™ and LakeSeries™ Aeration Systems Item # 510166 INSTALLATION INSTRUCTIONS Table of Contents: Product Contents ......2 Troubleshooting .
Page 2 PRODUCT CONTENTS The ProAir™ 4 is the most advanced diffuser on the market today and is specifically designed to maximize circulation and oxygen transfer in ponds and lakes. The ProAir™ 4’s weighted sled design keeps the diffuser submerged and prevents it from sinking into the muck.
Page 3 INSTALLATION INSTRUCTIONS Step 1 Align Diffuser Manifold with Diffuser Sled as shown in picture. Ensure the Airmax® logo on the Diffuser Manifold is facing up. NOTE: DO NOT tighten Membrane Stick to Diffuser Manifold without the Diffuser Sled and rubber o-ring in place.
Page 4 We recommend inspecting and/or cleaning the membrane diffuser sticks every 24-36 months, or anytime the pressure gauge reading is significantly higher than normal or there is a reduction in bubbles from the diffuser. To clean, use Airmax® D-Scale Cleaner (#530298) and a soft cloth.

510166