Denon MC2000 Owner's Manual page 24

q
w
e
r
t
y
u
i
o
Q0
Q1
Q2
Q3 Q4 Q5 Q6 Q7 Q8 Q9
Q4
Cue button (CUE) ······································· (11)
Sets the cue point and stutters the cue point
when pushed repeatedly.
Q5 13
Play/pause button ( )
Plays back when pressed while playback is
W0
stopped. Pauses playback when pressed during
playback.
Q6
VINYL switching button (VINYL MODE)
W1
ON: Switches to VINYL mode.
• The touch sensor is enabled when in VINYL
W2
mode.
OFF: Switches to BEND mode.
W3
• The touch sensor is disabled when in BEND
mode.
W4
Q7
Pitch bend adjustment buttons
(PITCH BEND –/+)
W5
Adjust the pitch temporarily.
W6
SHIFT
• Hold down W7 and press this button to
fast forward/rewind.
Q8
Channel fader knob
W7
Adjusts the mixing level for each deck.
W8
Q9
Crossfader knob
Adjusts the output balance of the channel level.
18
Top panel
W0
Channel input level adjustment knob
(LEVEL)
W1
Load button (LOAD A, LOAD B)
SEL.
Loads the file selected using W3 to either
DECK A or DECK B.
• Press this button twice quickly to load the
same file as one on the other deck.
W2
Channel isolator EQ adjustment knob
(HI/MID/LOW)
Adjusts the input signal frequency response for
each channel.
• Turn to the left to cut the sound at the HI/MID/
LOW frequency band (isolator function).
W3
Track selection knob (SEL.)
Turn the knob to scroll through the browser list,
and press the knob to select a file.
Turn the track selection knob:
Scrolls through the browser list.
Press the track selection knob:
Switch the focus of browser.