Settings; Adjust Speaker Level; Set Display Brightness; Auto Standby - Philips Fidelio B95 User Manual

5 Settings

5 Settings

Adjust speaker level

Adjust speaker level
Repeatedly press Repeatedly press
select the speakers below and press the left select the speakers below and press the left
and right navigation buttons to adjust the and right navigation buttons to adjust the
speaker level speaker level
• SUB (subwoofer) • SUB (subwoofer)
• CTR XX (center speaker) • CTR XX (center speaker)
• SIDE L XX (side left speaker) • SIDE L XX (side left speaker)
• SIDE R XX (side right speaker) • SIDE R XX (side right speaker)

Set display brightness

Set display brightness
Repeatedly press Repeatedly press
menu, select DIM and press the left and right menu, select DIM and press the left and right
navigation buttons to adjust the brightness navigation buttons to adjust the brightness
level of the display panel on this product. level of the display panel on this product.
• HIGH (high) • HIGH (high)
• MID (medium) • MID (medium)
• LOW (low) • LOW (low)
Display auto o Display auto o
Repeatedly press Repeatedly press
menu, select DISP and press the left and right menu, select DISP and press the left and right
navigation buttons to select DISP ON or DISP navigation buttons to select DISP ON or DISP
OFF. OFF.

Auto standby

Auto standby
When playing media from a connected When playing media from a connected
device, this product automatically switches device, this product automatically switches
to standby if: to standby if:
• no source button is pressed for 15 minutes, • no source button is pressed for 15 minutes,
and and
• no audio/video playback is detected from • no audio/video playback is detected from
a connected device. a connected device.
EN EN
16 16
to enter the settings menu, to enter the settings menu,
to enter the settings to enter the settings
to enter the settings to enter the settings

Apply factory settings

Apply factory settings
In case of no response from this product, you In case of no response from this product, you
can reset this product to the default settings can reset this product to the default settings
programmed at the factory. programmed at the factory.
In standby mode, press and hold VOL +/- In standby mode, press and hold VOL +/-
buttons on the main unit simultaneously buttons on the main unit simultaneously
for 8 seconds until RESET displays on the for 8 seconds until RESET displays on the
display panel. display panel.
When the factory settings restore is When the factory settings restore is
complete, the product automatically turns o complete, the product automatically turns o
and restarts. and restarts.