Table of Contents
Advertisement
Description and Configuration
1.5.
The output sine and cosine pulse trains are interpolated to spread out the pulses evenly
throughout the .5 µs sample period. The output pulse can be clocked at four different
frequencies depending on the input frequency and the pulse width jumper settings. The
output clock can be 4 MHz, 8 MHz, 16 MHz, or 32 MHz.
The following chart in Figure 1-8 shows the count spacing over a .5 µs period with the
clock set to 32 MHz. Sixteen counts per .5 µ second sample period generates the
maximum of 32 million counts per second.
32 MHz
1 count
2 counts
3 counts
4 counts
5 counts
6 counts
7 counts
8 counts
9 counts
10 counts
11 counts
12 counts
13 counts
14 counts
15 counts
16 counts
The following chart in Figure 1-9 shows the count spacing over a .5 µs period with the
clock set to 16 MHz. Eight counts per .5 µ second sample period generates the maximum
of 16 million counts per second.
1-12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
MXH Multiplier Option Manual
Output Pulse Clock Speed
Figure 1-8.
Aerotech, Inc.
.5 µ Second
32 MHz Count Spacing
Version 1.6
Advertisement
Table of Contents
