Pulse Width Jumpers (Jp2 & Jp3); Test Points; Table 1-2. Settings For Pulse Width Jumpers; Table 1-3. Mxh Multiplier Board Test Points - Aerotech MXH Series Option Manual

Description and Configuration
1.4.4. Pulse Width Jumpers (JP2 & JP3)
Table 1-2.

1.4.5. Test Points

Table 1-3 lists the test points available on the MXH multiplier boards.
Table 1-3.
1-8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Settings for Pulse Width Jumpers
JP2 JP3
1 1
1
1
1 1
1 1
MXH Multiplier Board Test Points
Test Points
TP4 Ground
TP5 Sin Reference (Approx. 2.5V)
TP6 Squared up marker signal from encoder
TP7 Cos reference (Approx. 2.5V)
TP8 NC
TP9 Amplified input sine wave (0 - 5V)
TP10 Amplified input cosine wave (0 - 5V)
TP11 A/D sample clock
TP12 HDC
TP13 LDC
TP14 M14 Flash reset
TP15 M13 Flash reset
TP16 Flash Ready/Busy signal
TP17 Output marker, square wave
TP18 Output sine, square wave
TP19 Output cosine, square wave
Aerotech, Inc.
MXH Multiplier Option Manual
Function
Minimum pulse width = 0.03125 µs
Master clock frequency = 32 MHz
Minimum pulse width = 0.0625 µs (default)
Master clock frequency = 16 MHz (default)
Minimum pulse width = 0.125 µs
Master clock frequency = 8 MHz
Minimum pulse width = .25 µs
Master clock frequency = 4 MHz
Function
Version 1.6