Operating The "Oyster® Tv; Initial Setup - Ten-Haaft Premium OYSTER 65 Instructions For Use Manual

2. OPERATING THE SYSTEM
5) For Android, the Command Unit will automatically connect to the app via WiFi. For Apple, the WiFi connec-
tion of the Command Unit must be selected in the device settings. The app indicates its connection to the
WiFi system.
6) Your Command Unit is now connected to your mobile device (see green dot)
Please contact us if you have any further questions! You can call us at +49 (0) 7231 / 58 588 0.
18
3. OPERATING THE "OYSTER® TV"

3.1 Initial setup

Your Oyster TV set is configured at the factory with a standard channel list and, depending on specifications,
with favourite lists. (See section 4.5, Favourite lists (satellite TV) if you wish to create further lists.) Should any
channels be missing or if you wish to add further channels, you need to start the automatic channel scan.
Select a signal source. If using a ten Haaft satellite system, DVB-S must be selected.
Press to open the signal input menu.
SOURCE
Press to select the input, then press
OK
system will automatically switch back to the current signal source after a few seconds.
Press to exit the menu. The following signal inputs can be selected. Press the corresponding buttons on the
EXIT
remote control:
• Digital TV
• Satellite TV
• AV
• HDMI 1
• HDMI 2
• USB
to confirm. If no source is selected using the
OK
button, the
19