Samsung Galaxy S7 edge Instruction Manual page 121

■ ■ Notes■on■the■security■codes
• Avoid using a number that is easy to guess, such as "birth date", "part of
your phone number", "street address number or room number", "1111", and
"1234". Make sure to make a note of the security code you set lest you
should forget it.
• Be very careful not to let others know your security code. If your security
code is known by anyone else, DOCOMO shall have no liability for any loss
due to any unauthorized use of it.
• If you forget security codes, you should bring your official identification
(such as driver's license), the terminal, and docomo nano UIM card with you
to the nearest docomo Shop. For details, contact the "docomo Information
Center" on the last page of this manual.
• The PUK code is written on the subscription form (copy for customer)
handed at the subscription in the docomo Shop. If you have subscribed at
other than docomo Shop, you should bring your official identification (such
as driver's license), the docomo nano UIM card with you to the nearest
docomo Shop or contact "docomo Information Center" on the last page of
this manual.
■ PIN/password■for■screen■lock ■
The security code is used for lock function of the terminal.
■ Network■security■code ■
The network security code is a 4-digit number necessary for
identification or using the docomo Network Services or " お客様サポート
(Customer support)" at reception of your request in docomo Shop or at
docomo Information Center. It can be set any number at the subscription
and also changed later by yourself.
For details on Network security code, refer to NTT DOCOMO website.
■ PIN■code ■
You can set security code, named PIN, for the docomo nano UIM card.
This code are set to "0000" at the time of subscription. They can be
changed by yourself.
PIN is a 4- to 8-digit number (code) that must be entered for user
confirmation to prevent unauthorized use of docomo nano UIM card by
a third party every time you insert the docomo nano UIM card into the
terminal or when the terminal is powered on. You can set entering the
PIN code enables making/receiving calls and terminal operations.
• If you use newly purchased the terminal with the docomo nano UIM
card you used inserted, use the set PIN code on the former terminal.
• If you enter a incorrect PIN code 3 consecutive times, the PIN code
is locked and you cannot use the code. In this case, enter "PIN
Unblocking Key" (PUK) to unlock and then set PIN code again. Enter
PUK (8 digits) → "OK" → Enter a new PIN code → "OK" → Enter the
PIN code again → Tap "OK".
• In Airplane mode, PIN code entry screen does not appear; when
the Airplane mode is disabled, the PIN code entry screen appears.
In Airplane mode, a PIN code entry screen does not appear when
docomo nano UIM card is attached to the terminal or turn the power
of the terminal on.
■ PUK■code■ ■
The PUK code is an 8-digit number for canceling the locked PIN code.
The PUK code cannot be changed by yourself.
• If you enter a incorrect PUK code 10 consecutive times, the docomo
nano UIM card is locked. If it locked, please contact a docomo Shop.
Changing PIN code
When "Lock SIM card" (P.119) is set, you can change the PIN code.
1
From■the■Home■screen,■ ■→■Settings"■→■"Lock■screen■and■
security"■→■"Other■security■settings"■→■"Set■up■SIM■card■
lock"■→■"Lock■SIM■card"■→■Enter■PIN■■→■"OK"
• "Lock SIM card" turns on.
Changing PIN code
When "Lock SIM card" (P.119) is set, you can change the PIN code.
1
From■the■Home■screen,■ ■→■"Settings"■→■"Lock■screen■and■
security"■→■"Other■security■settings"■→■"Set■up■SIM■card■
lock"
2
"Change■SIM■card■PIN"■→■Enter■the■current■PIN■code■and■a■
new■PIN■code■according■to■the■onscreen■instructions
119
Settings