Transportation; Preparation To Utilization; Storage; Service Life Period - MTX СМ120 User Manual

44
This product can be transported with all types of covered vehicles according to the rules of
transportation current for each type of vehicles.
Climatic conditions for transportation:
- ambient temperature: -20 to +55 °С;
- relative air humidity up to 80% at the temperature of +20 °С.
During transportation and handling the package with the product should avoid impacts and
atmospheric precipitation.
Placement and fi xing the transportation package with the product in a vehicle should ensure stable
position and no movements during transportation.
Before disposing of this product, it is necessary to completely drain the hydraulic fl uid from it. To
do this, turn the release valve counterclockwise to fully lower the piston down, then close the valve,
open the oil fi ller plug and drain the oil completely.
Thoroughly clean the concrete mixer. Check connections and screws and tighten if necessary.
Check that the concrete mixer is not damaged. If necessary, repair it. To repair or replace parts,
contact your service center. It is necessary to store the concrete mixer in a dry place, at ambient
temperature from 0 to + 40 °C and relative humidity of air no more than 80%. Shelf life is not
limited.
The average service life of the product is 5 years on condition that the customer follows the
operation rules.
The date of manufacture is indicated on the product.
The product is covered by the warranty according to the terms specifi ed in the warranty card. Terms
of warranty service are given in the warranty card.
CONCRETE MIXER

TRANSPORTATION

PREPARATION TO UTILIZATION

STORAGE

SERVICE LIFE PERIOD

DATE OF MANUFACTURE

WARRANTY OBLIGATION