Incidents Or Accidents - MTX СМ120 User Manual

Content of operations
Clean the mixer surface from concrete and dust.
Wash the inside cavities of the drum by rotating it and
adding water and crushed stone.
Check the tightening level of threaded connections,
operability of the mains cord.
Carry out works in the scope of monthly servicing.
Check parameters of the toothed rim.
Carry out works in the scope of monthly servicing and
Check belt tensioning and, if necessary, adjust. The
sign of loosening of the belt tension is the decrease in
rotating speed of the drum by more than 5% from 29
It is necessary to watch the belt tensioning condition. The sign of loosening of the belt tension is
the decrease in rotating speed of the mixing drum. Rotating speed for this electric drive should be
about 27 RPM. When the belt tension is loosened in the course of work it is necessary to switch off
the concrete mixer.
LIST OF CRITICAL FAULTS AND WRONG ACTIONS OF PERSONNEL
LEADING TO INCIDENTS OR ACCIDENTS
The personnel operating and servicing the concrete mixer should understand and realize that the
concrete mixer, as well as any other machine, under certain circumstances, can represent threat for
life and health.
Servicing every shift
Maintenance (M-1) every 200 hours
Maintenance (M-2) every 600 hours
M-1.
RPM
CONCRETE MIXER
The used tools and materials
Wrenches, rags, water
Wrenches, rags, water
Wrenches, rags, water
41