Assembly - MTX СМ120 User Manual

CONCRETE MIXER
34

ASSEMBLY

1
Set on the wheel support axis,
pos. 1 washer 27, then wheel,
pos. 2 and one more washer
27. Insert into axis openings
2
the splints so that they are
located at the outside of the
washer. Remove splints, using
fl at-nose pliers..
Connect the support, pos.
3 with the frame, pos. 4 by
means of bolts M8 x 65 and
fi x with M8 nuts. The support
4
should be installed from the
frame side with 3 openings
3
(for the CM120 model - from
the spring side).
Connect the wheel support
complete with the frame, pos.
4
4 by means of bolts M8 x 65
and fi x with M8 nuts.