Saving Power In Standby Mode; Changing The Brightness Of The Front Panel Display And Indicators (Dimmer) - Sony HT-G700 Operating Instructions Manual

Changing the Brightness
of the Front Panel
Display and Indicators
(DIMMER)
You can change the brightness of the
following.
• Front panel display
• BLUETOOTH indicator
• Power indicator on the subwoofer
1
Press DIMMER repeatedly to
select the desired setting.
Front panel
display
[BRIGHT]
[DARK]
[OFF]
Note
The front panel display is turned off when
[OFF] is selected. It turns on automatically
when you press any button, then turns off
again if you do not operate the system for
about 10 seconds. However, in some cases,
the front panel display may not turn off. In
this case, the brightness of the front panel
display is same as [DARK].
DIMMER
Function
The front panel display
and indicators light
brightly.
The front panel display
and indicators light
darkly.
The front panel display
is turned off.
Saving Power in Standby
Mode
Check that you have made the following
settings:
– [HDMI] - [STANDBY THROUGH] is set to
[OFF] (page 35). (The default setting is
[AUTO].)
– [BT] - [STANDBY] is set to [OFF]
(page 36). (The default setting is [ON].)
GB
37