Technical Specifications; Technical Data Of The Mp6-Hyb - Bartels Mikrotechnik microComponents mp6 Series Operating Manual

5

Technical specifications

Technical Data of the mp6-hyb

mp6-hyb
Pump type
Number of actuators
Dimensions without connectors
Weight
Fluidic connectors
Electric connector
Power consumption
Self-priming
Pumping media
Operating temperature
Life time
IP code
Material in contact with media
Suitable pump driver
Typical values of flow and back pressure for selected media
(values measured with mp-x: 100 Hz, 250 V, SRS):
Liquids – water
9
Controllable flow range
��
typ. flow rate �� (p=0)
typ. back pressure p (��=0)
Gases - air
typ. volume flow ��(p=0)
typ. back pressure p (��=0)
1 Typical values. Values can vary under application conditions. Content is subject to changes without notice.
2 Recommended tubing: Tygon tubing 1.3 mm inner diameter.
3 Conditions: Suction pressure > 10 mbar, DI water, settings mp-x: 100 Hz, 250 V, SRS, the volume flow will be reached after a few
minutes of operation time.
4
Conditions: DI water (25°C), room temperature 23°C, settings mp-x: 100 Hz, 250 V, SRS
5 Conditions: air, room temperature 23°C, mp-x: 300 Hz, 250 V, SRS
6 Conditions: settings mp-x: 100 Hz, 250 V, SRS
7 Can be changed to IP44.
8 For media compatibility details please find more information in the corresponding media compatibility sheets.
9 Controllable with frequency, voltage, signal form and more. Please contact us for more information.
Please find more information concerning the controller and the equipment in the corresponding manuals.
Rev. 3.1 (08.2020)
1
Order code: mp6-hyb
piezoelectric diaphragm pump
2
30 x 15 x 3,8 mm
1.1811 x 0.5906 x 0.1498 in.
2 g
barbed tube clip,
(outer diameter 1.9 mm, length 3.5 mm)
flex connector 1.25 mm pitch
6
~ 50 mW
yes 3
Liquids and gases
0–70°C
5000 h 6
IP33 7
polyphenylsulfone (PPSU) 8
mp-x, mp6-EVA, mp6-OEM, mp6-QuadOEM and mp6-
QuadKEY
8 µl/min – 10000 µl/min
4
8 ml/min
4
500 mbar (7,25 psi)
20 ml/min 5
5
80 mbar (1,16 psi)
2