Settings Guide And Automatic Start; Setting Your Security Pin; Setting The Clock - Redback MOWRO RM18 Operation Manual

Operation

Settings Guide and Automatic Start

1) Unlock the mower. (If locked, see steps 1-7 in the Unlocking the Mower section.)
2) Once the mower is unlocked press the "Set" button to shift through the icons
at the top of the screen.

Setting Your Security PIN

1) Unlock the mower. (If locked, see steps 1-7 in the Unlocking the Mower section.)
2) Press the "Set" button until the lock icon is showing on the top the LCD screen.
3) Upon reaching the lock icon, your screen will display four zeros, with the fi rst
zero blinking.
4) From this screen, you can switch between the zeros by pressing
the "OK" button.
5) To set your PIN, shift to the desired zero and use the up and down
arrows located on the "Home" and "Start" button to set the number.
6) Repeat steps four and fi ve for all remaining numbers.
7) Once you have entered your desired PIN, press the "OK" button to toggle
through all the numbers until none of them are blinking.
8) Press "Set" to save your PIN.

Setting the Clock

Note: For the mower to properly operate on a schedule, you will need to set the
time on the mower's clock.
Note: THE CLOCK IS FORMATTED IN MILITARY TIME.
1) Unlock the mower. (If locked, see steps 1-7 in the Unlocking the Mower section.)
2) Press the "Set" button until the clock icon is showing at the top of the
LCD screen.
3) Upon reaching the clock icon, your screen will display four zeros, with the fi rst
zero blinking.
4) From this screen, you can switch between the zeros by pressing the
"OK" button.
5) To set the time, shift to the desired zero and use the up and down arrows
located on the "Home" and "Start" button to set the number.
6) When complete, toggle to the end of all the numbers until none of them are blinking.
7) Press "Set" to save the time.
14