Connecting The Wireless Receiver; Installing The Vitotrol 100; Opening The Vitotrol 100; Installing The Wall Mounting Base - Viessmann VITOTROL 100 Installation And Service Instructions Manual

Installation of wireless receiver, Vitodens...

Connecting the wireless receiver

X21 X7
X20
Fig. 5
1. Route the wireless receiver cable into the control
unit enclosure and insert the plug at "X7".

Installing the Vitotrol 100

Opening the Vitotrol 100

3.
2.
Fig. 6

Installing the wall mounting base

Always check the reception quality before fitting the
base to the wall (see page 13).
(cont.)
GAS PUMP FAN
?
2. Close the control unit enclosure and flip up the
4.
1.
X1
L N 1 L N
control unit; when doing so, ensure that the cable
does not become trapped.
Installation sequence
11