Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the indicator
light will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by holding the Timer button for 7 seconds, until a beep is heard and the
indicator light begins to flash quickly.
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Air Treatment > Air
Purifiers).
7.
Ensure that the device is in pairing mode, with the example of indicator, and tap
"Confirm light is rapidly flashing".