Cabinet Electrical Supply - Carrier CMCT Series Service & Installation Manual

CABINET ELECTRICAL SUPPLY

The connection points can be accessed by removing
the rear grill. Models CMCT-4 up through CMCT-8 have
115V service cords. CMCT-10 is 230V, hard wire con-
nected.
These cabinets must be on a dedicated cir-
NOTE:
cuit unto themselves. Failure to do so could
result in loss of product.
24
Wiring and connections in power
IMPORTANT:
supply system must meet all applica-
ble (local and national) electrical codes. Consult these
codes for wire lengths and sizes prior to cabinet instal-
lation.
The wiring diagram should be consulted before
attempting any electrical service.
MAINTENANCE & REPAIR