Fein AGWP10 Instruction Manual page 8

OBJ_BUCH-0000000365-001.book Page 8 Monday, February 11, 2019 10:03 AM
en
8
Intended use of the power tool:
Hand-guided tapper for cutting threads in
through holes and blind holes in weather-
protected environments without water sup-
ply using the application tools and accessories
recommended by FEIN.
Symbols.
Symbol, character Explanation
Do not touch the rotating parts of the power tool.
Observe the instructions in the text or graphic opposite!
Observe the notes in the text aside!
General prohibition sign. This action is prohibited.
Make sure to read the enclosed documents such as the Instruction
Manual and the General Safety Instructions.
Before commencing this working step, remove the battery from the
power tool. Otherwise there may be danger of injury caused by
unintentional starting of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat,
e. g. against continuous intense sunlight.
Switching on
Switching off
Confirms the conformity of the power tool with the guidelines of the
European Community.
This symbol confirms the certification of this product for the USA and
Canada.
This sign warns of a directly imminent, dangerous situation. A false
DANGER
reaction can cause a severe or fatal injury.
This sign indicates a possible dangerous situation that could cause severe
WARNING
or fatal injury.
This sign warns of a possible dangerous situation that could cause injury.
CAUTION
Recycling code: identifies recyclable materials