Roland V-02HD Owner's Manual

* V-02HD Remote can be used with V-02HD units that are running version 1.1 or later. Be sure to update your V-02HD unit to the latest version.

Connecting the iPad and the V-02HD

1. Connect the V-02HD's USB port to the iPad.
Using a commercially available connection or an adaptor cable (Lightning-USB camera adaptor), connect the unit to the iPad.
Lightning-USB camera adaptor
2. Turn on the power to the V-02HD.
V-02HD Remote is a dedicated iPad application for the Roland
V-02HD.
Connecting the V-02HD and the iPad via USB lets you operate
the V-02HD from V-02HD Remote.
USB Type-C™ port
Lightning port
* Roland is an either registered trademark or trademark of Roland Corporation in the United States and/or other
countries.
* Company names and product names appearing in this document are registered trademarks or trademarks of their
respective owners.
Starting and Quitting V-02HD Remote

Starting the V-02HD Remote

1.
Turn on the power to the iPad on which V-02HD Remote is installed.
2. Tap the V-02HD Remote icon.
V-02HD Remote starts, and the V-02HD Remote screen appears.
NOTE
If the connection status does not change to "ONLINE" (connected), re-check the connection between the iPad and the V-02HD unit.
Quitting
1.
Press the Home button on the iPad.
V-02HD Remote ends, and the Home screen reappears.
© 2019 Roland Corporation
Connection status
Connected
Not connected